|
|
DYNOmite Axle-Hub Dyno Prices and Models (partial list) |
|
|
(603) 226-DYNO |
|
|
|
|
 |
#044-100-1K | 1000 Axle-Hub Dyno |
1,000+ Hp** unit includes: Pair of heavy-duty rolling modules with eddy-current controller and high-speed (medium inertia) air-cooled absorbers, automatic camber compensation, thermostatically-controlled fans, dual torque transducers, swivel casters, alloy quick-change axle-flange adapters, DYNOmite-Lite data-acquisition computer, axle and engine (ignition) RPM pick-ups, Auto-Load Control, 3-channel data harness, DYNO-MAX software, atmospheric correction, banner, accessories package, and manual (less PC). (Upgradeable to AWD configuration - at any time.) |
On Sale $29,950 or $669 Month*** |
|
|
#044-125-1K | 1250 Axle-Hub Dyno |
1,250+ Hp** unit includes: Pair of heavy-duty rolling modules with eddy-current controller and high-speed (medium inertia) air-cooled absorbers, automatic camber compensation, thermostatically-controlled fans, dual torque transducers, swivel casters, alloy quick-change axle-flange adapters, DYNOmite-Lite data-acquisition computer, axle and engine (ignition) RPM pick-ups, Auto-Load Control, 3-channel data harness, DYNO-MAX software, atmospheric correction, banner, accessories package, and manual (less PC). (Upgradeable to AWD configuration - at any time.) |
$39,950 or $889 Month*** |
 |
#044-150-1K | 1500 Axle-Hub Dyno |
1,500+ Hp** unit includes: Pair of heavy-duty rolling modules with eddy-current controller and high-speed (medium inertia) air-cooled absorbers, automatic camber compensation, thermostatically-controlled fans, dual torque transducers, swivel casters, alloy quick-change axle-flange adapters, DYNOmite-Lite data-acquisition computer, axle and engine (ignition) RPM pick-ups, Auto-Load Control, 3-channel data harness, DYNO-MAX software, atmospheric correction, banner, accessories package, and manual (less PC). (Upgradeable to AWD configuration - at any time.) |
On Sale $39,950 or $889 Month*** |
 |
#044-015-1K | 150 Axle-Hub Dyno |
DYNOmite eddy-current ATV / sled axle-hub drive dynos. Includes (custom designed) mounting/drive for specific recreational vehicles. Used by OEM’s for load simulation and Hp tuning. (Call for more information.) |
Custom |
 |
#075-400-1K | Snowmobile CVT Dynamometer | Components for testing continuously variable transmission, belt, and engine performance on many standard snowmobiles. Includes: adjustable clutch mounting assembly with tube steel frame, inertia flywheel, engine to dyno driveshaft components, S-beam load cell, clutch and belt guards, ratchet tie downs, hand-crank height adjustment, angle-adjust drive-up ramp, ski guides, and adjustable tunnel support arm. Requires #075-200-2K (or equivalent) and DYNO-MAX "Pro" software. | $19,950 |
|
|
#044-200-1K | 2000 AWD Axle-Hub Dyno | 2,000+ Hp** unit includes: Four heavy-duty rolling modules with eddy-current controllers and high-speed (medium-inertia) air-cooled absorbers, automatic camber compensation, thermostatically-controlled fans, electronic AWD-axle synchronization, four torque transducers, swivel casters, alloy quick-change axle-flange adapters, DYNOmite-Lite data-acquisition computers, axle and engine (ignition) RPM pick-ups, Auto-Load Control, 3-channel data harnesses, DYNO-MAX software, atmospheric correction, banner, accessories package, and manual (less PC). |
|
|
|
#044-250-1K | 2500 Pro AWD Axle-Hub Dyno |
2,500+ Hp** unit includes: Four heavy-duty rolling modules with eddy-current controllers and high-speed (medium-inertia) air-cooled absorbers, automatic camber compensation, thermostatically-controlled fans, electronic AWD-axle synchronization, four torque transducers, swivel casters, alloy quick-change axle-flange adapters, DYNOmite-Lite data-acquisition computers, axle and engine (ignition) RPM pick-ups, Auto-Load Control, 3-channel data harnesses, DYNO-MAX software, atmospheric correction, banner, accessories package, and manual (less PC). |
$79,950 |
|
|
#044-302-2K | 3000 Pro AWD Axle-Hub Dyno |
Pro dynamometer system for axle-hub testing high-speed AWD automotive vehicles up to 3,000+ Hp**. Includes: Four heavy-duty rolling modules with eddy-current controllers and high-speed (medium-inertia) air-cooled absorbers, automatic camber compensation, thermostatically-controlled fans, electronic AWD-axle synchronization, four torque transducers, swivel casters, alloy quick-change axle-flange adapters, DYNOmite-Pro data-acquisition computers, axle and engine (inductive clamp) RPM pick-ups, Auto-Load Control, 28-channel data harnesses, temperature thermistor, DYNO-MAX “Pro” software, Windows-7 equipped Dell laptop, computer stand, Air/Fuel Ratio Module (with pump), Weather-Station Kit, 42" cooling fan, color printer, banner, accessories package, and manual. |
|
 |
#048-160-1K | 1800 Pro Planetary Axle-Hub Dyno | Pro dynamometer system for axle-hub testing high-speed automotive vehicles up to 1,800+ Hp**. Includes: Pair of axle-mounted absorbers featuring (low-inertia) planetary-driven water brakes, dual strain-gauge (full-bridge) equipped torque arms, alloy axle-flange adapters, DYNOmite-Pro data-acquisition computer, axle and engine (inductive clamp) RPM pick-ups, Auto-Load Control, 28-channel data harnesses, temperature thermistor, DYNO-MAX “Pro” software, Windows-7 equipped Dell laptop, computer stand, Air/Fuel Ratio Module (with pump), Weather-Station Kit, 42" cooling fan, color printer, banner, accessories package, and manual. | $39,950 |
| Axle-Hub Dyno Accessories (partial listing, click to view complete Dyno Accessories Page): |
| Click on image or "Specifications" link below to view detailed specifications page. |
 |
#046-040 | ACtiveSync Modules | ACtiveSync™ Modules deliver axle-synchronization via a pair of 20-Hp motoring drive units and micro-second response AC controllers. These units provide precision matching of the un-powered axles (on traction-controlled ABS equipped vehicles) during 2WD dyno testing. Includes dual AC drives to match each (unpowered) vehicle’s spindles to the dynamometer’s roller(s) – or other axle-hubs’ spindles. Units adaptable to many brands of chassis dynamometers. Includes a single pair of standard axle-flange adapters. (May be upgraded, at any time, to full DYNOmite Axle-Hub Dynamometer capabilities – by adding our eddy-current absorber kits) | $39.950 |
 |
#437-040 | ACtiveSync™ Axle-Hub Upgrade | ACtiveSync™ Axle-Hub Upgrade (axle-synchronization and motoring) drive option for DYNOmite Axle-Hub Dynamometers. Feature dual 20-Hp motoring drive units with micro-second response heavy-duty AC controllers. Basic ACtiveSync provides precision matching of front-to-rear 2WD axles – on traction-controlled ABS equipped vehicles. For eddy-current absorber equipped axle-hub dynamometer testing, installing a pair of (optional) encoders allows for steeper downhill (motoring) simulations. Adding our (optional) heavy-duty resistive load banks significantly increases these AC-motors’ absorption capacity, allowing them to enhance speed control and synchronization authority – even during standard dynamometer testing. (See below for optional Axle-Hub Encoder Kit and Resistive Load Bank Kit.) |
$14,950
|
 |
#441-022 | Axle-Hub Encoder Kit | Encoder kit for ACtiveSync equipped axle-hub dynamometers. Installing encoders allows for "flying starts" of ACtiveSync motors, on eddy-current equipped axle-hub dynamometers, for steeper downhill (motoring) simulations, etc..Compact encoder mounting design and harness is ready for coupling with a pair of 20-Hp ACtiveSync motors and drives. | $1,950 |
 |
#442-022 | Resistive Load Bank Kit | Resistive load bank package includes pair of heavy-duty air-cooled cabinets with spiral-wound resistive elements. With the addition of the heavy-duty external load banks, the Active-Synch equipped units have more loading authority and offer an advantage during 2WD testing on the driven axle – because the load banks almost triple the (near instantaneous) loading available from the Active-Synch motor pair. Compact design is sized for coupling with a pair of 20-Hp ACtiveSync motors and drives. | $9,950 |
 |
#437-400 | Axle-Flange 4x100,108,110 Kit | Axle-Flange Adapter Kits includes pair of axle-flange adapters (for 4 x 100mm, 4 x 108mm, & 4 x 110mm wheel-bolt patterns). Mate to quick-change hubs of DYNOmite eddy-current absorber or ACtiveSync (AC motor) equipped axle-hub dynamometers. | $795 |
|
|
#437-500 | Axle-Flange 5x4.50,4.75,5.00 Kit | Axle-Flange Adapter Kits includes pair of axle-flange adapters (for 5 x 4-1/2", 5 x 4-3/4", & 5 x 5" wheel-bolt patterns). Mate to quick-change hubs of DYNOmite eddy-current absorber or ACtiveSync (AC motor) equipped axle-hub dynamometers. | $795 |
|
|
#437-505 | Axle-Flange 5x100,114.3,120 Kit | Axle-Flange Adapter Kits includes pair of axle-flange adapters (for 5 x 100mm, 5 x 114.3mm, & 5 x 120mm wheel-bolt patterns). Mate to quick-change hubs of DYNOmite eddy-current absorber or ACtiveSync (AC motor) equipped axle-hub dynamometers. | $795 |
|
|
#437-506 | Axle-Flange 5x110,112,130 Kit | Axle-Flange Adapter Kits includes pair of axle-flange adapters (for 5 x 110mm, 5 x 112mm, & 5 x 130mm wheel-bolt patterns). Mate to quick-change hubs of DYNOmite eddy-current absorber or ACtiveSync (AC motor) equipped axle-hub dynamometers. | $795 |
 |
#430-465 | Weather Station Module | Provides automatic entry of air temperature, barometric pressure, and relative humidity. | $495 |
 |
#430-500 | Sparkplug/Head Thermocouple | Sparkplug and head-temperature thermocouple (requires DYNOmite-EGT upgrade). | $69.95 |
 |
#801-190 | DYNO-MAX™ "Lite" Software | Special low-cost “Lite” version of DYNO-MAX specifically created for students and do-it-yourselfers building their own low- budget dynamometers or adding basic electronic data acquisition to existing analog dynamometers. (Requires PC and DYNOmite data-acquisition board set.) |
$495* |
|
|
#801-200 | DYNO-MAX 2010 Software | Standard-version data-acquisition software for integrating a 64-bit (or 32-bit) Windows 7® (Vista®, or XP®)-equipped PC with the DYNOmite computer. Features: multiple environments, graphing, dampening, etc. (Does not include formula editor, overlaying, report designer, import/export, and many other advanced-configuration features.) |
$995* |
|
|
#801-201 | DYNO-MAX 2010™ "Pro" Software | Advanced “Pro”-version data-acquisition software for integrating a 64-bit (or 32-bit) Windows 7® (Vista®, or XP®)-equipped PC with the DYNOmite computer. Features: formula editor, report editor, data import/export, advanced configurations, multiple environments, graph overlaying (with averages and variance listings), consecutive run averaging, advanced dampening and spike- filtering controls, data averaging, advanced auto-test editor, and more. |
$1,995* |
*Many DYNOmite pre-packaged systems include a credit (discount) of 50%, or more, towards the above DYNO-MAX license fees!
**Approximate; continuous capacities
depend on selected absorber and test speed.
Air-cooled absorber loads are rotor temperature dependant. Water brake
power capacities are RPM dependent and assume a minimum water
supply of 1 gpm @ 30 psi for every 20 continuous Hp. Call Land & Sea,
Inc. at (603) 226-3966 for the
approximate capacity of any specific test configuration.
* * *Business lease rates for 60 month term (with $1 buy-out) require first and last months installment plus good credit.
