FREE
trial versions (or multi-media tours) of DYNO-MAX "Pro" for download
(or on CD). Other than their inability to print and save data, these
are fully functional (time limited) versions of DYNO-MAX "Pro". Click for an online streaming-media demo of DYNO-MAX's features.
Tip: This is NOT a "Desktop Dynamometer" (software engine simulation) or "Horsepower Estimator" program. DYNO-MAX is software for use in conjunction with a physical electronic data-acquisition system (like the DYNOmite). If you are actually browsing for just a simulator program, try searching the web under "desktop dyno engine simulation". Be aware that most inexpensive simulation programs are toys! Engineering caliber simulation software licenses are in the $10,000 range!
*This is our smaller download of just the Trial Version! For the full Multi-Media Demo Tour, see bottom of page).
Test out a working demo trial version of DYNO-MAX 2010 "Pro". Even user's without a DYNOmite (or compatible third-party data-acquisition system) can use the included sample data to experiment with many of its features.
1) After
reading these instructions, click on the Download
Trial Version link (below) to begin.
2) Windows' "File Download" dialog
appears, where you select either of the following methods:
a) If you pick "Save this program to disk" browse to
select your Windows "Desktop" as the folder to store the zipped
file in, then skip to Step #3.
b) If you pick "Run this program from its current location"
then skip to step #4.
3)
Double click the downloaded "demo-cd.exe"
file (on your Windows Desktop) to start the unzip routine.
4) Follow the unzip prompts to extract the files to
a temporary folder on your PC.
5)
When the DYNO-MAX Installation routine begins, skip to step #6.
a) If the installation setup does not auto-start, click your
Windows "Start" button and select "Run..."
b) Type in: a:\setup.exe
c) Press "Enter" key to begin installation.
6) Follow the installer's on-screen
instructions.
7) When
prompted for the Serial #, enter:
DEMO
IMPORTANT: Your SERIAL # for installation is " DEMO ".
42 megabytes (approximate download time with typical cable modem or DSL = 3 minutes)!
*This Demo Tour includes the above Free Trial Version of DYNO-MAX 2010 "Pro"
Do you have a fast Internet connection, a sound card, and 500 megabytes of free disk space? If so, download our (fully narrated) demonstration tour of many DYNO-MAX "Pro" features!
1)
After reading these instructions, click on the
Download Multi-Media Demo Tour link (below) to begin.
2) Windows' "File
Download" dialog appears, where you select "Save this
program to disk."
3)
Browse to select your Windows " Desktop" as the folder to store
the zipped file in.
Tip: You'll locate the saved file easily by specify your Window's "
desktop" as the download destination.
Important: Do not select to "Run
this program from its current location"!
4) Double click the
downloaded "demo_tour-cd.exe" file (on your
Windows Desktop) to start the unzip routine.
5) Follow the unzip prompts to extract the files to
a temporary folder on your PC.
6) The DYNO-MAX Demo Tour
begins.
a) If the Tour does not auto-start, click your Windows "Start"
button and select "Run..."
b) Browse to the unzip routine's temp folder and click on
"Demo.exe" to start the tour!
Download Multi-Media Demo Tour now!*
IMPORTANT: Your SERIAL # for installation is " DEMO ".
ATTENTION: This is a LARGE DOWNLOAD!
241 megabytes (approximate download time with typical cable modem
or DSL = 16 minutes)!
If it is
too big to download,
request this
free Multi-Media Demo Tour (with Trial Version) by postal mail on CD!