DYNOmite PWC Dynamometer Prices |
|
(603) 329-5645 |
|
|
|
|
|
| #065-200-1K
|
PWC Engine Dyno Kit
|
Components for testing many PWC engines to 250+ Hp.* Includes: 9" toroid water brake absorber, strain gauge equipped torque arm, DYNOmite-Pro data acquisition computer, manual load valve, absorber mounted magnetic RPM pick-up, 3-channel data harness, mounting hardware, stainless braided hoses with aircraft fittings, carrying case, and manual. (Requires separate purchase of an appropriate adapter for direct PWC pump mounting – see below.) |
$4,995
|
| #100-106 | PWC Adapter - Kawasaki 155mm | Mounts DYNOmite PWC absorber to 155mm Kawasaki pump units. (Requires #100-107 – below.) | $895 |
| #100-107 | PWC Adapter - Kawasaki 144mm | Mounts DYNOmite PWC absorber to 144mm Kawasaki pump units. | $995 |
| #100-108 | PWC Adapter - Sea-Doo to 800cc | Mounts DYNOmite PWC absorber to 800cc and smaller Sea-Doo pump units. | $795 |
| #100-109 | PWC Adapter - Yamaha 144mm | Mounts DYNOmite PWC absorber to 144mm Yamaha pump units. | $995 |
| #100-110 | PWC Adapter - Polaris | Mounts DYNOmite PWC absorber to Polaris pump units. | $895 |
| #100-111 | PWC Adapter - Yamaha 155mm | Mounts DYNOmite PWC absorber to 155mm Yamaha pump units. | $895 |
| #100-112 | PWC Adapter - Sea-Doo 951cc | Mounts DYNOmite PWC absorber to 951cc (and larger) Sea-Doo pump units. | $795 |
| #425-280 | 28-channel Data Harness | Expanded harness has leads required to support separately purchased data acquisition options. | $595 |
| #430-132 | Kill Switch Relay Kit | SPDT relay for ignition over-rev control on normally closed and non-“ground to kill” applications. | $115 |
| #430-141 | Portable Thermal Printer | Battery powered serial and parallel port ASCII thermal printer. | $395 |
| #430-310 | Auto-Load Servo | Upgrades manual load valve DYNOmite to automatic computerized electronic RPM control. | $1,095 |
| #430-441 | EGT Kit w/3 Probes (compression) | Exhaust Gas Temperature Kit with DYNOmite upgrade - includes: 3 compression fitting type thermocouples. (See DYNOmite Accessories section). | $395 |
| #430-465 | Weather Station Module | For automatic entry of air temperature, barometric pressure, and relative humidity conditions. (See DYNOmite Accessories section.) | $495 |
| #801-190 | DYNO-MAX "Lite"™ Software | Special low-cost “Lite” data acquisition software for integrating a Windows PC with the DYNOmite-Lite (or DYNOmite-Pro) computer. |
$495 |
| #801-200 | DYNO-MAX 2000™ Std Software | Standard 32-bit data acquisition software for integrating a Windows PC with DYNOmite computer. |
$995 |
| #801-201 | DYNO-MAX 2000™ "Pro" Software | Advanced 32-bit data acquisition software for integrating a Windows PC with DYNOmite computer. Includes: Formula Editor, Report Editor, Graph Overlays, data averaging, etc. |
$1,995 |
| #970-155 | “Pro” Small Engine Stand | Professional roll formed steel frame, removable stand (or wall) mount vibration isolated console, universal (rubber mount) engine plate, throttle, shelves, battery tray, and wheels (boom optional). | $2,495 |
*Actual power capacities are RPM dependent and assume a minimum water
supply of 1 g.p.m. @ 30 psi. for every 20 continuous Hp. Call Land & Sea,
Inc. at +1-603-226-DYNO for the
approximate capacity of any specific test configuration.
* * *Business lease rates for 60
month term (with $1 buy-out) require first and last months installment plus good
credit.
