|
|
DYNOmite Truck Chassis Dynamometer Prices and Models (partial list) |
|
|
(603) 226-DYNO |
|
|
|
|
Eddy-Current Single-Axle Models & Prices Eddy-Current Multi-Axle Models & Prices Chassis Dyno Accessories & Prices |
|
 |
#034-3000-1K | 3000-Lite 2WD IO Chassis Dyno | Low-cost 3,000* 2WD inertia-only unit includes: heavy-duty tube-steel frame and 30"-diameter “dually” wide-roll assembly – with machined-in “traction grooves,” PTOs, air brakes, diamond-tread deck plate, floor anchors, vehicle tie downs, DYNOmite-Lite data-acquisition computer, inductive RPM pickup, DYNO-MAX “Lite” software, 3-channel data harness, banner, accessories package, and manual (less PC). (Upgradeable to single or dual eddy-current absorber, water-brake absorber, “Pro” 28-channel, or AWD configurations – at any time.) |
$21,950 |
 |
#036-1200-1K | 1200 2WD EC Chassis Dyno | 1,200* 2WD eddy-current unit includes: monocoque steel frame and low-profile 12"-diameter linked medium-inertia dual-roll assembly – with machined-in “traction grooves,” mobile casters, vibration-pad leveling, roll shield, removable drive-up ramps, wheel chocks, eddy-current absorber and controller with overdrive, S-beam load cell, DYNOmite-Pro data-acquisition computer, inductive RPM pickup, DYNO-MAX software, auto-load control, 28-channel data harness, temperature thermistor, banner, accessories package, and manual (less PC). (Upgradeable to AWD configuration – at any time.) |
$34,950 |
 |
Intro Price! #036-1300-1K |
1300-Lite 2WD EC Chassis Dyno | Low-cost 1,300* 2WD eddy-current unit includes: monocoque steel frame and low-profile 13"-diameter linked low-inertia quad-roll assembly – with machined-in “traction grooves,” PTO, roll shield, drive-up-ramps and pit-plate plans, eddy-current absorber and controller with overdrive, S-beam load cell, DYNOmite-Lite data-acquisition computer, DYNO-MAX “Lite” software, auto-load control, 3-channel data harness, banner, accessories package, and manual (less PC). (Upgradeable to AWD configuration – at any time.) | |
 |
#036-2350-1K | 2350-Lite 2WD EC Chassis Dyno | Low-cost 2,350* 2WD eddy-current unit includes: pit-mount tube-steel cradle frame and 24"-diameter high-inertia roll assembly – with machined-in “traction grooves,” PTO, air brakes, pit-plate plan, eddy-current absorber and controller, S-beam load cell, DYNOmite-Lite data-acquisition computer, DYNO-MAX “Lite” software, auto-load control, 3-channel data harness, banner, accessories package, and manual (less PC). Upgradeable to dual eddy-current absorbers, and "Pro" 28-channel – at any time.) |
$24,950 or $599 Month*** |
 |
#036-2400-1K | 2400 2WD EC Chassis Dyno | 2,400* 2WD eddy-current unit includes: heavy-duty tube-steel frame and 24"-diameter roll assembly – with machined-in “traction grooves,” air brakes, diamond-tread deck plate, floor anchors, vehicle tie downs, eddy-current absorber with overdrive and controller, S-beam load cell, DYNOmite-Pro data-acquisition computer, inductive RPM pickup, DYNO-MAX software, auto-load control, 28-channel data harness, banner, accessories package, and manual (less PC). (Upgradeable to dual eddy-current absorbers and AWD configurations – at any time.) |
$34,950 |
 |
#036-2450-1K | 2450 2WD EC Chassis Dyno | 2,450* 2WD eddy-current unit includes: heavy-duty tube-steel frame and 24"-diameter twin-roll assembly – with machined-in “traction grooves,” air brakes, diamond-tread deck plate, floor anchors, wheel chocks, vehicle tie downs, eddy-current absorber with overdrive and controller, S-beam load cell, DYNOmite-Pro data-acquisition computer, inductive RPM pickup, DYNO-MAX software, auto-load control, 28-channel data harness, temperature thermistor, banner, accessories package, and manual (less PC). (Upgradeable to AWD configuration – at any time.) |
$41,950 |
|
|
#036-3000-1K | 3000 2WD EC Chassis Dyno | 3,000* 2WD eddy-current unit includes: heavy-duty tube-steel frame and 30"-diameter “dually” wide-roll assembly – with machined-in “traction grooves,” air brakes, diamond-tread deck plate, floor anchors, wheel chocks, vehicle tie downs, eddy-current absorber and controller with overdrive, S-beam load cell, DYNOmite-Pro data-acquisition computer, inductive RPM pickup, DYNO-MAX software, auto-load control, 28-channel data harness, temperature thermistor, banner, accessories package, and manual (less PC). (Upgradeable to dual eddy-current absorber and AWD configurations – at any time.) |
$41,950 or $939 Month*** |
 |
#036-6000-2K | 6000-Pro 4WD EC Chassis Dyno | 6,000* “Pro” tandem-axle 4WD eddy-current dynamometer system includes: heavy-duty tube-steel frame and tandem 30"-diameter roll assemblies – with machined-in “traction grooves,” air brakes, diamond-tread deck plate, floor anchors, wheel chocks, vehicle tie downs, dual eddy-current absorbers and controllers with overdrives, dual S-beam load cells, DYNOmite-Pro data-acquisition computers, inductive RPM pickup, DYNO-MAX “Pro” software, auto-load control, 28-channel data harnesses, temperature thermistor, Windows 7®-equipped Dell™ laptop, computer stand, AFR module (with pump), weather station, 42" cooling fan, color printer, banner, accessories package, and manual. | $105,000 |
 |
#036-4400-1K | 4400 2WD EC Chassis Dyno | 4,400* 2WD eddy-current unit includes: heavy-duty tube-steel frame and 44"-diameter twin-roll assembly – with machined-in “traction grooves,” air brakes, diamond-tread deck plate, floor anchors, wheel chocks, vehicle tie downs, eddy-current absorber and controller with overdrive, S-beam load cell, DYNOmite-Pro data-acquisition computer, inductive RPM pickup, DYNO-MAX software, auto-load control, 28-channel data harness, temperature thermistor, banner, accessories package, and manual (less PC). |
$48,950 or $1,119 Month*** |
 |
#970-924 | 2450 EC Chassis Roll Assembly | Custom tube steel frame with 24” diameter high-inertia twin-roll assembly, eddy-current absorber with overdrive and controller, S-beam load cell, floor anchors, wheel chocks, and vehicle tie-downs (less all DYNOmite electronics). (Upgradeable to AWD configuration – at any time.) | $37,450 |
 |
#037-2400-1K |
2400 4WD EC Chassis Dyno | 2,400* 4WD eddy-current unit includes: monocoque steel frame and low-profile 12"-diameter tandem-roll assemblies (front and rear axle) – with machined-in “traction grooves,” electrically adjustable wheelbase with telescoping-ramp system, vibration-pad leveling, bolt-on roller shield, removable drive-up ramps, dual eddy-current absorbers and controllers with overdrives, electronic AWD-axle synchronization, dual S-beam load cells, DYNOmite-Pro data-acquisition computers, inductive RPM pickup, DYNO-MAX software, auto-load control, 28-channel data harnesses, temperature thermistor, banner, accessories package, and manual (less PC). |
$69,950 |
|
|
#037-2400-2K | 2400-Pro 4WD EC Chassis Dyno | 2,400* "Pro" 4WD eddy-current dynamometer system includes: monocoque steel frame and low-profile 12"-diameter tandem-roll assemblies (front and rear axle) – with machined-in “traction grooves,” electrically adjustable wheelbase with telescoping-ramp system, vibration-pad leveling, bolt-on roll shield, removable drive-up ramps, dual eddy-current absorbers and controllers with overdrives, electronic AWD-axle synchronization, dual S-beam load cells, DYNOmite-Pro data-acquisition computers, inductive RPM pickup, DYNO-MAX “Pro” software, auto-load control, weather station, AFR module (with pump), 42" cooling fan, 28-channel data harness, temperature thermistor, Windows 7®-equipped Dell™ laptop, computer stand, color printer, banner, accessories package, and manual. |
$77,950 |
 |
#036-6000-2K | 6000-Pro 4WD EC Chassis Dyno | 6,000* “Pro” tandem-axle 4WD eddy-current dynamometer system includes: heavy-duty tube-steel frame and tandem 30"-diameter roll assemblies – with machined-in “traction grooves,” air brakes, diamond-tread deck plate, floor anchors, wheel chocks, vehicle tie downs, dual eddy-current absorbers and controllers with overdrives, dual S-beam load cells, DYNOmite-Pro data-acquisition computers, inductive RPM pickup, DYNO-MAX “Pro” software, auto-load control, 28-channel data harnesses, temperature thermistor, Windows 7®-equipped Dell™ laptop, computer stand, AFR module (with pump), weather station, 42" cooling fan, color printer, banner, accessories package, and manual. |
$105,000 |
 |
#036-9000-2K | 9000-Pro 6WD EC Chassis Dyno | 9,000* “Pro” multi-axle 6WD eddy-current dynamometer system includes: includes: heavy-duty tube-steel frame and 30"-diameter “dually” wide-roll assemblies (front and tandem-rear axles) – with machined-in “traction grooves,” air brakes, electrically adjustable wheelbase frame with sliding diamond-tread deck plates, floor anchors, vehicle tie downs, electronic multi-axle synchronization, triple eddy-current absorbers and controllers with overdrives, triple S-beam load cells, DYNOmite-Pro data- acquisition computers, inductive RPM pickup, DYNO-MAX “Pro” software, auto-load control, 28-channel data harnesses, temperature thermistor, Windows 7®-equipped Dell™ laptop, computer stand, AFR module (with pump), weather station, 42" cooling fan, color printer, banner, accessories package, and manual. | $155,000 |
 |
#037-8850-1K |
8850 4WD EC Chassis Dyno | 8,850* 4WD eddy-current unit includes: heavy-duty tube-steel frame and 44"-diameter twin-roll assemblies (front and rear axle) – with machined-in “traction grooves,” air brakes, electrically adjustable wheelbase frame with sliding diamond-tread deck plates, floor anchors, vehicle tie downs, dual eddy-current absorbers and controllers with overdrives, electronic AWD-axle synchronization, dual S-beam load cells, DYNOmite-Pro data-acquisition computer, inductive RPM pickup, DYNO-MAX software, auto-load control, 28-channel data harnesses, temperature thermistor, banner, accessories package, and manual (less PC). |
$99,950 |
|
|
#037-8850-2K |
8850-Pro 4WD EC Chassis Dyno | 8,850* "Pro" 4WD eddy-current dynamometer system includes: heavy-duty tube-steel frame and 44"-diameter twin-roll assemblies (front and rear axle) – with machined-in “traction grooves,” air brakes, electrically-adjustable wheelbase frame with sliding diamond-tread deck plates, floor anchors, vehicle tie downs, dual eddy-current absorbers and controllers with overdrives, electronic AWD-axle synchronization, dual S-beam load cells, DYNOmite-Pro data-acquisition computer, inductive RPM pickup, DYNO-MAX “Pro” software, auto-load control, weather station, AFR module (with pump), 42" cooling fan, 28-channel data harness, temperature thermistor, Windows 7®-equipped Dell™ laptop, computer stand, color printer, banner, accessories package, and manual. | $107,000 |
|
|
#037-8800-1K | 8800 4WD EC Chassis Dyno | 8,800* 4WD eddy-current unit includes: heavy-duty tube-steel frame and 44"-diameter twin-roll assemblies (front and rear axle) – with machined-in “traction grooves,” air brakes, electrically adjustable wheelbase frame with sliding diamond-tread deck plates, floor anchors, vehicle tie downs, dual eddy-current absorbers and controllers with overdrives, mechanical AWD-axle synchronization (with pneumatic declutching), dual S-beam load cells, DYNOmite-Pro data-acquisition computer, inductive RPM pickup, DYNO-MAX software, auto-load control, 28-channel data harnesses, temperature thermistor, banner, accessories package, and manual (less PC). | $109,000 |
|
|
#037-8800-2K | 8800-Pro 4WD EC Chassis Dyno | 8,800* "Pro" 4WD eddy-current dynamometer system includes: heavy-duty tube-steel frame and 44"-diameter twin-roll assemblies (front and rear axle) – with machined-in “traction grooves,” air brakes, electrically adjustable wheelbase frame with sliding diamond-tread deck plates, floor anchors, vehicle tie downs, dual eddy-current absorbers and controllers with overdrives, mechanical AWD-axle synchronization (with pneumatic declutching), dual S-beam load cells, DYNOmite-Pro data-acquisition computer, inductive RPM pickup, DYNO-MAX “Pro” software, auto-load control, weather station, AFR module (with pump), 42" cooling fan, 28-channel data harness, temperature thermistor, Windows 7®-equipped Dell™ laptop, computer stand, color printer, banner, accessories package, and manual. | $117,000 |
|
|
#035-1200-1K |
1200 2WD WB Chassis Dyno | 1,200* 2WD water-brake unit includes: monocoque steel frame and low-profile 12"-diameter linked medium-inertia dual-roll assembly – with machined-in “traction grooves,” mobile casters, vibration-pad leveling, roll shield, removable drive-up ramps, wheel chocks, 13" toroid water-brake absorber with overdrive, S-beam load cell, DYNOmite-Pro data-acquisition computer, inductive RPM pickup, DYNO-MAX software, auto-load control, 28-channel data harness, temperature thermistor, stainless-braided hoses with aircraft fittings, banner, accessories package, and manual (less PC). |
$29,950 |
|
|
#035-1200-2K |
1200-Pro 2WD WB Chassis Dyno | 1,200* “Pro” 2WD water-brake unit includes: monocoque steel frame and low-profile 12"-diameter linked medium-inertia dual-roll assembly – with machined-in “traction grooves,” mobile casters, vibration-pad leveling, roll shield, removable drive-up ramps, wheel chocks, 13" toroid water-brake absorber with overdrive, S-beam load cell, DYNOmite-Pro data-acquisition computer, inductive RPM pickup, DYNO-MAX “Pro” software, auto-load control, 28-channel data harnesses, temperature thermistor, stainless-braided hoses with aircraft fittings, Windows 7®-equipped Dell™ laptop, computer stand, AFR module (with pump), weather station, 42" cooling fan, color printer, banner, accessories package, and manual. |
$37,950 |
|
|
#035-2450-1K |
2450 2WD WB Chassis Dyno | 2,450* 2WD water-brake unit includes: heavy-duty tube-steel frame and 24"-diameter twin-roll assembly – with machined-in “traction grooves,” air brakes, diamond-tread deck plate, floor anchors, vehicle tie downs, wheel chocks, 13" toroid water-brake absorber with overdrive, S-beam load cell, DYNOmite-Pro data-acquisition computer, inductive RPM pickup, DYNO-MAX software, auto-load control, 28-channel data harness, temperature thermistor, stainless-braided hoses with aircraft fittings, banner, accessories package, and manual (less PC). |
$33,950 |
|
|
#037-2450-2K | 2450-Pro 2WD WB Chassis Dyno | 2,450* “Pro” 2WD water-brake unit includes: heavy-duty tube-steel frame and 24"-diameter twin-roll assembly – with machined-in “traction grooves,” air brakes, diamond-tread deck plate, floor anchors, wheel chocks, vehicle tie downs, 13" toroid water-brake absorber with overdrive, S-beam load cell, DYNOmite-Pro data-acquisition computer, inductive RPM pickup, DYNO-MAX “Pro” software, auto-load control, 28-channel data harnesses, temperature thermistor, stainless-braided hoses with aircraft fittings, Windows 7®-equipped Dell™ laptop, computer stand, AFR module (with pump), weather station, 42" cooling fan, color printer, banner, accessories package, and manual. |
$41,950 |
|
|
#035-4400-1K |
4400 2WD WB Chassis Dyno | 4,400* 2WD water-brake unit includes: heavy-duty tube-steel frame and 44"-diameter twin-roll assembly – with machined-in “traction grooves,” air brakes, diamond-tread deck plate, floor anchors, vehicle tie downs, wheel chocks, 13" toroid water-brake absorber with overdrive, S-beam load cell, DYNOmite-Pro data-acquisition computer, inductive RPM pickup, DYNO-MAX software, auto-load control, 28-channel data harness, temperature thermistor, stainless-braided hoses with aircraft fittings, banner, accessories package, and manual (less PC). |
$41,950 |
|
|
#035-4400-2K |
4400-Pro 2WD WB Chassis Dyno | 4,400* “Pro” 2WD water-brake unit includes: heavy-duty tube-steel frame and 44"-diameter twin-roll assembly – with machined-in “traction grooves,” air brakes, diamond-tread deck plate, floor anchors, wheel chocks, vehicle tie downs, 13" toroid water-brake absorber with overdrive, S-beam load cell, DYNOmite-Pro data-acquisition computer, inductive RPM pickup, DYNO-MAX “Pro” software, auto-load control, 28-channel data harnesses, temperature thermistor, stainless-braided hoses with aircraft fittings, Windows 7®-equipped Dell™ laptop, computer stand, AFR module (with pump), weather station, 42" cooling fan, color printer, banner, accessories package, and manual. |
$49,950 |
| Chassis Dyno Accessories (partial listing, click to view complete Dyno Accessories Page) |
| Click on image or "Specifications" link below to view detailed specifications page. |
 |
#430-182 | Wide Band O2 Module w/Pump | AFR (air/fuel ratio) module (analog or digital output) with portable, shop-air-supply powered, vacuum pump and tailpipe “sniffer.” | $2,495 |
 |
#430-170 | Exhaust Smoke Opacity Meter | Provides real-time monitoring of diesel engine’s exhaust-stack emissions (includes integral LCD). | $4,495 |
 |
#430-175 | Exhaust Measuring System 5-gas | Five-gas emissions analyzer (O2, CO, CO2, HC’s, and NOX) with real-time readouts (on integral LCD) and optional display and capture of exhaust data (including lambda and AFR) via digital DYNO-MAX RS-232 link. | $5,995 |
 |
#430-194 | Diesel Fuel Rail RPM (1/4") | Diesel fuel-rail RPM pickup (1/4") senses RPM from clamp-on fuel-injector-rail transducer. | $245 |
 |
#430-465 | Weather Station Module | Provides automatic entry of air temperature, barometric pressure, and relative humidity. | $495 |
**Approximate; limited primarily by tire safety and
traction - higher torque transfer requires tie downs. Continuous capacities
depend on selected absorber and test speed. Water brake
power capacities are RPM dependent and assume a minimum water
supply of 1 gpm @ 30 psi for every 20 continuous Hp. Call Land & Sea,
Inc. at (603) 226-3966 for the
approximate capacity of any specific test configuration.
* * *Business lease rates for 60 month term (with $1 buy-out) require first and last months installment plus good credit.
